|
|
1979-1986 Mustang
1979 marked the launch of the third-generation Mustang, based on a brand new platform. It also marked the departure of Lee Iacocca, the man responsible for the Mustang. Enthusiasm for the Mustang would slowly come back in the mid 80's, as the introducton of High Output 5.0L and Turbocharged SVO's slowly won back the power fanatics. |
|
|
|
|
gorgan1314 |
1986 Mustang GT
|
 |
|
86 GT 5.0, T-5. 89 GT interior, spindles and brakes. Tourbocoupe rear discs. underdrive pulleys, subframe connectors, lower chassis brace, boxed rear control arms, poly bushings and 3.73s out back. 306, balanced, recon rods with ARP, AFR 165, RPM Airgap, Big's 650, custom cam, hypers, ARP head & main studs. Shorty headers(for now) into off road H into super turbos. |
|
 |
|
CID:306 |
|
|
|
|
|
351W, Foxlake StageIII Canfields, Foxlake Super Vic, Pro-Systems 4150, NOS Big Shot, PA Super Comp, 4:30, Auburn Pro, Moser Axles, Strange Adj. Shocks/Struts, UPR Suspension, 8-Pt Cage, 10 Gal. Fuel Cell, 2 Blue Pumps, 275/60/15 MT Drag Radials |
|
 |
|
CID:351 |
|
|
|
|
mwarchut |
1984 GT Convertible
|
|
|
1984 Mustang GT Convertible. Original Paint, Original body, restored interior, Cobra wheels, PowerStop Brakes, Eibach Springs, Koni Struts and Shocks. Newly rebuilt engine blueprinted and balanced roller block with E7TE heads that have ported and polished. E303 Cam, 1.6 Roller rockers, underdrive pullies... 800 watt stereo system and 2 alarm systems and 2 cut-off switchs (she's been stolen before). I am 2nd owner. |
|
 |
|
CID:302 |
|
|
|
|
|
Bored .030 stroked 3.85, H beam,scat crank, KB, AFR 185,750 HP,MSD,TCI 3800 Stall, 373:1, upper/lowers, ET Streets, Flow Masters, Stock injection pump,Mallory Regulator set at 8-9 psi, Manual valve body, Red Eagle Homebuilt tranny, 6 cluthes,kevlar band, PA servo. Victor Jr, Port Matched, Hooker Super Comps. |
|
 |
|
1/4 Mile:11.21 MPH:121.00 60ft:1.55 Weight:3400 CID:392 Flywheel HP:545@5800 Torque:600@5200 |
|
|
|
|
|
Still almost stock ... might switch to 4v and a better axle ratio |
|
 |
|
CID:302 |
|
|
|
|
blazer1970 |
1985 Mustang GT
|
|
|
408 Windsor, Pro-Comp heads with stage 3 porting, Ported Vic Jr intake manifold, 950 Pro-Systems holley, Hooker super comp headers, 3" exhaust, TKO-500, 8.8 with 31 spline moser axles,4.10 gear, Baseline suspension uppers, AJE tubular K-member and A-arms, strange coilovers, Battery in hatch, etc... No track times yet, looking for 10.70-10.90's |
|
 |
|
Weight:3000 CID:408 |
|
|
|
|
|
No description available. |
|
 |
|
CID:302 Rearwheel HP:171@4371 Torque:252@3121 |
|
|
|
|
egangt |
1986 ford Mustang GT
|
|
|
not a whole lot done at this time, this photo is from last winter. right now the motor is out of it and the 347 is about to go in. I have the body pretty well squared up, its dropped with the cobra R's. 3.73 gears, flowmasters and other misc bolt ons |
|
 |
|
CID:302 |
|
|
|
|
|
84 Mustang Gt. t-tops, New project. already done a bunch of work, but needs a bunch more. little rust around the hatch. wish someone would start making replacement panels aftermarket. |
|
 |
|
CID:306 |
|
|
|
|
|
THE LONG ROD 306 ET'S ARE ALL MOTOR AND THE RUNS WERE MADE WITH MUFFLERS AND D.O.T TIRES, CAST HEADS WITH FULL INTERIOR AND STOCK GAS TANK.THE LONG ROD 306 HAS PROBE 5.40 RODS WITH ROSS PISTONS, CAT CRANK.DSS MAIN SUPPORT STSTEM. THE HEART OF THE 306 IS A CUSTOM GROUND CAM RESEARCH CAMSHAFT.VICTOR JR INTAKE. PRO-SYSTEMS 750 HP CARB.PROBE ROCKERS AND BALANCER.HAS A ROLLER C-4 TRANS WITH ALL PA PARTS AND A HUGHES CONVERTER 8.8 WITH 4.30 GEARS |
|
 |
|
1/4 Mile:10.90 MPH:121.00 60ft:1.56 Weight:3100 CID:306 |
|
|
|
|
